Best UltraGard Can Am F3 Cover Review Guide 2021– This cover is designed specifically for the F3 and as is typical with UltraGard covers, the seams are interlocked and double stitched so they will not pull apart.
Made from durable polyurethane coated polyester for excellent weather resistance, this new cover is stylishly designed in black over charcoal with UltraGard’s high visibility reflective piping allowing your ride to be seen at night and in the parking lot to avoid being hit.
Includes two rust proof grommets with 10” bungee and coated hooks to allow the elastic hem to be securely fastened for a snug fit. An expandable zippered windshield pocket and zippered backrest pocket allows proper fitment for F3 Spyder with or without a windshield or backrest.
A lined heat shield protects the cover from hot mufflers and added liner pads protect from wear at the mirrors, handlebars and tail lights where extra wear can occur. A handy zippered storage pouch allows easy repacking into a compact size for on Spyder storage.
Fits Can Am Spyder F3. To find out even more keep reading our Best UltraGard Can Am F3 Cover Review Guide 2021.
UltraGard 4-476BC Can Am F3 Cover
To start off with the Can-Am Spyder covers at the dealership where we bought our Can-Am Spyders where going to cost about $150 each and that was for small covers that only covered the instruments and the seats. The larger covers that covered the entire Spyder were going to cost about $280 each. Now to be fair I can’t speak for the quality of those and assume they would be very high quality for that price.
However, seems how we will only be needing them for a month or so I figured it would be best to search online and I’m glad I did! Amazon to the rescue. We ending up going with the UltraGard 4-476BC Can Am F3 Cover for a fraction of the cost.
We bought two for the price of one of the Spyder covers at the dealership that would have only covered half the Spyder. Fits exactly as shown in pics, quick easy on/off. The day it arrived I installed it immediately due to a storm on the way.
I was pleasantly surprised in the morning when the cover was exactly as I installed it the night before. Very little moisture got through as well. Installing correctly is key, I pulled the cover down and made sure it was over the bottom of each tire and attached bungie hooks. I use the cover everyday, it’s that easy to install. Fits over Can Am Blueridge windscreen, and driver backrest without having to unzip cover pouches.
Also I might add it installs easily in seconds and fits in your trunk which is a plus if you know how limited space is on these machines! Also I haven’t had any issues with wind blowing it off and I live in a place
where winds are a daily occurrence. The color has faded over time but that is to be expected in my situation considering I use it daily when I park it in the hot sun at work!
Oddly enough I get an Amazon warning that “this product does not fit your: 2021 Can-Am Spyder F3 SE6” but I can assure you it does as you can see the image at the top of the page. The UltraGard Can Am F3 Cover fits perfect!
- Fits Can Am Spyder F3/S/T Without Trunk
- Polyurethane Coated Polyester for Maximum Durability and Light Weight Compactness
- Cover has been Custom Designed to Provide the Same Tailored Fit UltraGard Covers are Known For
- Expandable Zippered Windshield Pocket Along with a Zippered Backrest Pocket for Proper Fitment With or Without Windshield or Backrest
- Comes with Small Compact Pouch for on Board Storage while Traveling
- Manufacturer UltraGard
- Brand UltraGard
- Model 4-476BC
- Item Weight 1 pounds
- Product Dimensions 18 x 15 x 5 inches
- Item model number 4-476BC
- Is Discontinued By Manufacturer No
- Manufacturer Part Number 4-476BC
- Cover Included Cover
- Vehicle Service Type Street-cruiser-motorcycles
Best UltraGard Can Am F3 Cover Guide 2021
There are 2 zipper parts that are designed for a windshield and what I think is a back seat rest or a back seat seat rest (2 up seat rest). Neither of those are on our Can-Am Spyders so I just leave them zipped up. They also came with a small travel pouch which to be honest we haven’t used as we just put them both in a single plastic trash bag. (Much faster and easier).
Easy to use and includes straps:
There are two bungie cords with hooks that you can hook together under the Can-Am Spyder however it’s not the easiest to reach under those things so I just hook them around the Spyder frame bars and back into the hole of the hooks.
We only use the hooks when we know we won’t be riding them for a few days at a time. For example on the weekends when we get back from a ride and are done for the day we’ll wait about 30 minutes or so to let the mufflers cool down then put the covers on for the night with out strapping them. Then the next evening we’ll strap them.
The UltraGard Can Am F3 Cover is super easy to put on and take off. While I’ll admit it’s obviously easier to put on and take off with two people, I’ve done it by myself a lot without any trouble at all. Below is a link to the ones we got with what should be the current price as well. I highly recommend them if you are looking for a simple low cost Can-Am Spyder F3 cover.
Other Can-Am Ryker Covers To Check Out:
Can-Am 4-474BC Can-Am Ryker Cover
Looking for a Can-Am Ryker Cover? If so check out the UltraGard (4-474BC Can-Am Ryker Cover as it’s the Ryker version of the covers we bought for our Spyders and of the same quality.
Can-Am Spyder F3T/LTD Cover
Have a Can-Am Spyder F3T/LTD then check out this cover. The UltraGard 4-477BC Can-Am Spyder F3T/LTD Cover is similar to the cover we bought for our Can-Am F3 SE6 Spyders only designed to fit the Can-Am Spyder F3T/LTD. Great investment to protect your Spyder from the weather.
Price point is great in my opinion. Definitely worth the money, especially when compared to manufacturers
cover cost. Thanks for taking the time to read my Best UltraGard Can Am F3 Cover Review Guide 2021.